|
 ES-AC900:
Proximity Card Reader with Number Pad
The ES-AC900 proximity card reader is an advanced Access control card
reader in a weather-proof case. It can read ID cards and has a
keypad for PIN entry. A bi-color LED and a beeper provide visual and
audio feedback.
The ES-AC900 can operate in network mode using the
AC1000 controller, or in standalone mode. The control mode,
card capacity, card type and more options can be assigned by the user.
Maximum card read distance depends on the environment and setup, but is
approximately 15cm (5.9 inches). We recommend the ES-AC220A/AC225
proximity cards and the
ES-AC230
keychain fobs for best results.
- 12 character numeric keypad
- Visual feedback: 1 red/green LED
- Audible feedback: Internal transducer (buzzer/beeper)
- Keypad will lock for 30 seconds after continuous error operation
- 11 sets of time codes
- Up to 120 holiday schedules
- Built-in watchdog to prevent system halting
 - Support delay relay auto-relock function
- RS-485 support for networking (via controller or directly)
- User assigns control mode, card capacity and card type
- RF Frequency / Reading range 125 kHz / 10-18cm
- Networking: RS-485, 9600, N, 8, 1
- External reader port: Suitable for all WG, ABA reader, 125K, 13.56M
(Mifare) or 2.4G reader
- Door relay: 12VDC @ 2A NO/NC/COM 0.1-60 sec. latch type
- Alarm relay: transistor output/serial output (selective)
- DI input: Egress button / door sensor / card sensor
- Tamper switch
- Serial port: limit switch (form C)
- Dimensions: 112mm x 76mm x 25mm (4.41" x 2.99" x .98")
Connects easily to our
AC1000 panel
Connect to PC using
CN550
|
FREE
