This weatherproof proximity card reader is a perfect Access control device for doors in factories, office buildings, and other sensitive areas.

Maximum distance is approx. 18cm (7 inches), depending on weather conditions.

Keypad & Proximity Card Reader w/ LCD Display

- Big and clear LCD display, 4 lines text, 1024 x 64 pixel graphic
- Unlimited site codes
- 11 sets of time zones
- Different time zone for each user
- Up to 120 holiday schedules
- Auto-show work status (set via time zone edit)
- Master cards range assignable
- RS-485 support for networking (via controller or directly)
- Built-in door sensing and arming inputs (on/off)
- Auto open/close scheduling of doors
- Control mode, card capacity and card type assignable by user directly
- Built-in proximity reader and external Wiegand reader port
- Auto-discriminating between stand-alone & networking system
- Alarm function available (tamper, force entrance, door sense)
- Networking: RS-485, 9600, N, 8, 1
- External reader port: Suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader
- RF Frequency / Reading range 125 kHz / 10-18cm
- Door relay: 12VDC @ 2A NO/NC/COM 0.1-600 sec. latch type
- Alarm relay: 12VDC @ 2A NO/NC/(jumper) 0.0-600 sec. (COM Common)
- DI input: Egress button / door sensor / card sensor
- Transistor output: Arming / door sensor / card sensor
- Tamper switch limit switch (form C)
- Serial port: supported for AI-401R016, LED display, relay board, printer ETC. (4800, N, 8, 1)
- Made of ABS plastic
- Dimensions: 127mm x 91mm x 46mm (5" x 3.58" x 1.81")

Request to Exit Detector

• Voltage: 12 ~ 28 V DC, Power

• Consumption: 50 mA,

• Unlocks door automatically

• Hands-free

• No buttons to push

Proximity Cards

• Read range 10~15cm

• Printed material can be posted on the front of card

• ISO standard card

• Thickness 1.8mm

• 8 digit card number printed on the back of the card

• Works with all Eclipes® Readers

• Pack of 25 pieces